Amana Tool 51821 CNC Solid Carbide Aluminum and Acrylic Cutting 55 Deg Helix End Mill 3mm Dia x 15mm Cut Height x 6mm In
Amana Tool 51821 CNC Solid Carbide Aluminum and Acrylic Cutting 55 Deg Helix End Mill 3mm Dia x 15mm Cut Height x 6mm In
Amana Tool 51821 CNC Solid Carbide Aluminum and Acrylic Cutting 55 Deg Helix End Mill 3mm Dia x 15mm Cut Height x 6mm In
Amana Tool 51821 CNC Solid Carbide Aluminum and Acrylic Cutting 55 Deg Helix End Mill 3mm Dia x 15mm Cut Height x 6mm In

Amana Tool 51821 CNC Solid Carbide Aluminum and Acrylic Cutting 55 Deg Helix End Mill 3mm Dia x 15mm Cut Height x 6mm Inch Shank x 3 Flute

$53.27

SKU: 51821 Amana Tool

Only 5 left!
Cutting Dia3mm
Cutting Length15 mm
Flutes3

Description

Amana Tool® 55° helix 2 and 3 flute endmills with ideal geometry for superb finishing of aluminum and acrylic. Very capable of leaving a crystal-clear finish on acrylic for both walls and pocket floor surfaces. Endmills with upgraded helix angles are your friend when better surface finishes, reduced vibrations, enhanced chip removal and improved dimensional tolerances all take priority over material removal rates. Excellent for cutting: Acrylic Aluminum, Brass, Copper Non-Ferrous Metals

Feeds & Speeds
Based on published chip-load charts. Full calculator →
Cut not coming out right? Melting, chipping, burning or tearout — the Cut Doctor reads your settings (or a photo of the edge) and gives you the cause, corrected numbers, and the bit that fixes it. Free, no signup.