Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit

Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit

$122.41

SKU: 49130 Amana Tool

Only 5 left!
Cutting Dia1-1/2″
Cutting Length9/16″
Shank1/2″
Flutes4

Description

Use these cove bits to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round. Large-diameter tools must be run at reduced speed. Bits with above 2" diameter are not guaranteed due extreme diameters. Use in hand-held or table-mounted routers. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish, and it will prolong tool life.

Feeds & Speeds
Based on published chip-load charts. Full calculator →
Cut not coming out right? Melting, chipping, burning or tearout — the Cut Doctor reads your settings (or a photo of the edge) and gives you the cause, corrected numbers, and the bit that fixes it. Free, no signup.