Amana Tool 49302 Rabbeting 3/8 Depth x 1-1/4 D x 1/2 CH x 1/2 Inch SHK Router Bit
✓In-stock orders placed by 3 PM ET ship the same business day from Vaughan, ON
⛟Shipping to the US: US$14.95 · free over US$300 · duties and taxes shown at checkout
📅Estimated delivery 3–7 business days
↩30-day returns on unused items in original packaging — details
Buying for a business? We quote and invoice against your PO — email sales@cncrouterstore.ca
SKU: 49302 Amana Tool
The Amana 49302 is a rabbeting bit that cuts a 3/8 in. rabbet with the standard bearing. The cutter is 1-1/4 in. in diameter with 1/2 in. of cutting height, on a 1/2 in. shank.
| Part number | Amana Tool 49302 |
|---|---|
| Type | Rabbeting bit |
| Rabbet depth (standard bearing) | 3/8 in. |
| Cutting diameter | 1-1/4 in. |
| Cutting height | 1/2 in. |
| Shank diameter | 1/2 in. |
How to use it
A rabbeting bit cuts an L-shaped step along the edge of a board. That step holds cabinet backs, glass and panel stops, and lap and shiplap joints. The guide bearing rides the edge of the work and sets how far the cut reaches in from that edge. The rabbet depth in the title is measured with the standard bearing. To change it, swap in one of Amana's optional bearings: 47702, 47706, 47718 or 47720. A smaller bearing gives a deeper rabbet. Set how deep the step goes down into the board with the router's depth setting, and take wide rabbets in two passes. It works in handheld and table-mounted routers.
Other sizes in this range: Amana 49300 (3/8 in. rabbet, 1-1/4 in. dia., 1/2 in. cut, 1/4 in. shank), Amana 49307 (1/4 in. rabbet, 7/8 in. dia., 5/8 in. cut, 1/2 in. shank), Amana 49309 (1/2 in. rabbet, 1-3/8 in. dia., 1/2 in. cut, 1/2 in. shank), Amana 49305 (1/4 in. rabbet, 7/8 in. dia., 1/2 in. cut, 1/4 in. shank).
