Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit
Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit

Amana Tool 49130 Carbide Tipped Cove 3/8 R x 1-1/2 D x 9/16 CH x 1/2 Inch SHK x 4 Flute w/ Lower Ball Bearing Router Bit

$99.00

SKU: 49130 Amana Tool

Only 5 left!
Cutting Dia1-1/2″
Cutting Length9/16″
Shank1/2″
Flutes4
By placing your order you agree to purchase from Global-e as the merchant of record, subject to Global-e’s Terms and Conditions and Privacy Policy, and share your information with CNC Router Store.

Description

Use these cove bits to detail the edges of casework, doors and drawers, posts and columns. The cove also makes up one-half of the rule joint used on drop-leaf tables. The other half is the corner-round. Large-diameter tools must be run at reduced speed. Bits with above 2" diameter are not guaranteed due extreme diameters. Use in hand-held or table-mounted routers. For best results with a large radius cutter, make a preliminary cut with a smaller radius bit or chamfer the workpiece to reduce the amount of stock to be removed in the finish pass. This will produce a smoother finish, and it will prolong tool life.

Feeds & Speeds
Based on published chip-load charts. Full calculator →
Cut not coming out right? Melting, chipping, burning or tearout — the Cut Doctor reads your settings (or a photo of the edge) and gives you the cause, corrected numbers, and the bit that fixes it. Free, no signup.