Amana Tool MR0114 Miniature 5/32 R Corner Rounding with 3/16 D Ball Bearing x 1/2 D x 3/8 CH x 1/4 Inch SHK Carbide Tipped Router Bit
Buying for a business? We quote and invoice against your PO — email sales@cncrouterstore.ca
SKU: MR0114 Amana Tool
The Amana MR0114 is a carbide tipped corner rounding (roundover) bit that rounds an edge to a 5/32 in. radius. The cutter is 1/2 in. in diameter with 3/8 in. of cutting height, on a 1/4 in. shank.
| Part number | Amana Tool MR0114 |
|---|---|
| Type | Corner rounding bit |
| Construction | Carbide tipped |
| Radius | 5/32 in. |
| Cutting diameter | 1/2 in. |
| Cutting height | 3/8 in. |
| Shank diameter | 1/4 in. |
| Bearing | 3/16 in. |
How to use it
A roundover bit eases a square edge into a smooth quarter-round of a set radius. It is the most-used edge profile on furniture, cabinet doors, shelving and signs, and it makes edges more comfortable and less likely to chip. A bearing below the cutter rides the edge of the workpiece and sets the profile, so no fence is needed on curved parts. If you raise the bit past the end of the radius, it leaves a small step above the curve, called a bead or fillet. The 4-flute versions give a smoother finish at a given feed. The miniature bits use a 3/16 in. bearing to reach into tight inside curves. For large radii, use a 1/2 in. shank in a router table and take the profile in two or more passes.
Other sizes in this range: Amana 49499 (5/32 in. radius, 13/16 in. dia., 3/8 in. cut, 1/4 in. shank), Amana 49496 (1/8 in. radius, 3/4 in. dia., 3/8 in. cut, 1/4 in. shank), Amana 49500 (3/16 in. radius, 7/8 in. dia., 1/2 in. cut, 1/4 in. shank), Amana 49544 (1/8 in. radius, 7/8 in. dia., 7/16 in. cut, 1/4 in. shank).
